Braeburn Premier 5050 Quick Reference Contents Manual
  1. Manuals
  2. Brands
  3. Braeburn Manuals
  4. Thermostat
  5. Premier 5050
  6. Quick reference contents manual
Braeburn Premier 5050 Quick Reference Contents Manual

Braeburn Premier 5050 Quick Reference Contents Manual

Premier series 7-day programmable single stage heat / cool digital thermostat
Hide thumbs Also See for Premier 5050:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
5050
OWNERS MANUAL
Compatible with low voltage single stage gas,
oil or electric heating or cooling systems,
including single stage heat pumps. This
thermostat can also be used on 250mv to
750mv millivolt heating only systems.
Do not use this thermostat on applications
with voltages above 30 Volts AC.
READ ALL INSTRUCTIONS BEFORE PROCEEDING
YEAR
LIMITED
WARRANTY
Store this
booklet for
future reference
Braeburn Systems LLC, as an Energy Star partner
has determined that this product meets the Energy
Star Guidelines developed by the U.S. Environmental
Protection Agency & the U.S. Department of Energy
for maximum energy efficiency.
© 2004 Braeburn Systems LLC All Rights Reserved.
Premier Series
7-Day Programmable
Single Stage Heat / Cool
Digital Thermostat
Pub. No. 5050-100-002
Quick Reference Contents Guide
CONTENTS
FEATURES
1
SPECIFICATIONS
2
INSTALLATION
3
Replacing Existing Thermostat
3.1
Installing Your New Thermostat
3.2
TESTING YOUR NEW THERMOSTAT
4
PROGRAMMING
5
Default Thermostat Settings
5.1
Setting Current Time of Day and Day of Week
5.2
Setting Temperature Differential and Residual
5.3
Cooling Fan Feature
Setting Temperature Differential
5.3.1
Setting Residual Cooling Fan Feature
5.3.2
Setting Your Energy Saving Programs
5.4
Tips Before Starting
5.4.1
Using Quick Program Groups
5.4.2
or Individual Day Programming
Entering Your Program
5.4.3
ADDITIONAL OPERATION FEATURES
6
6.1
Review Set Temperature
6.2
Temporary Program Override
6.3
Permanent Hold (Vacation) Mode
6.4
High Temperature Safety Switch
6.5
Low Temperature "Freeze" Protection
6.6
Compressor Protection
6.7
Changing Fahrenheit (˚F) to Celsius (˚C)
6.8
Low Battery Detection and Replacement
Replacing the Batteries
6.8.1
Resetting Thermostat
6.9
TROUBLESHOOTING
7
WIRING DIAGRAMS
8
WARNING!
Important Safety Information
• Always turn off power to the air conditioning or heating system prior to installing,
removing, cleaning or servicing thermostat.
• Read this manual thoroughly prior to installing, programming or operating this
thermostat.
• This thermostat is designed for use with a 24 Volt AC low voltage single stage gas
oil or electric heating or cooling system. This thermostat can also be used on
250mv to 750mv millivolt heating only systems.
• Do not use this thermostat on applications with voltages higher than 30 Volts AC.
• This thermostat requires two (2) properly installed "AA" alkaline batteries to
provide power for the thermostat to properly control the system operation.
• The system must have 24 Volt AC power present for proper system operation and
control.
• Wiring must conform to all building codes and ordinances as required by local
and national code authorities having jurisdiction.
• Do not short (or jumper) across terminals on the gas valve or at the heating or
cooling system control board to test the thermostat installation. This could
damage the thermostat and void the warranty.
• Do not select COOL mode of operation if the outside temperature is below 50˚ F
(10˚ C). This could possibly damage the controlled cooling system and may cause
personal injury.
• This thermostat should only be used as described in this
manual. Any other use is not recommended and will void the warranty.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Premier 5050 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Braeburn Premier 5050

Summary of Contents for Braeburn Premier 5050

  • Page 1 This could damage the thermostat and void the warranty. Braeburn Systems LLC, as an Energy Star partner • Do not select COOL mode of operation if the outside temperature is below 50˚ F has determined that this product meets the Energy (10˚...

  • Page 2: Installation

    FEATURES INSTALLATION cont. • Contemporary Styling with Large LCD Display 4. After labeling and removing all wires from terminals, unscrew the existing thermostat • 7 Day Programming Flexibility mounting base from wall. Make sure to secure wires to prevent them from slipping •...

  • Page 3: Testing Your New Thermostat

    TESTING YOUR INSTALLATION cont. NEW THERMOSTAT cont. Installing Your New Thermostat cont. 1. Place the system switch in the HEAT position. 2. Press the button on the keypad until the setpoint temperature setting is a minimum of 3 Place the thermostat rear body (mounting plate) against the wall in the desired location degrees higher than the current room temperature.
  • Page 4 PROGRAMMING PROGRAMMING cont. cont. Setting Current Time of Day and Day of Week cont. Setting Temperature Differential and Residual Cooling Fan Feature cont. NOTE: The thermostat will return to normal operating mode automatically after 15 Setting Residual Cooling Fan Feature cont. 5.3.2 seconds if no key is pressed.

  • Page 5: Additional Operation Features

    PROGRAMMING PROGRAMMING cont. cont. Setting Your Energy Saving Programs cont.. Setting Your Energy Saving Programs cont. Using Quick Program Groups or Individual Day Programming cont.. 5.4.2 8. Place the system switch in the COOL mode of operation. The display will show COOL. Follow steps 2 through 6 to program the setpoint times and temperatures for the Quick Weekend –...

  • Page 6: High Temperature Safety Switch

    ADDITIONAL ADDITIONAL OPERATION FEATURES OPERATION FEATURES cont. cont. Changing Fahrenheit (°F) to Celsius (°C) cont. High Temperature Safety Switch While the thermostat is in the HEAT mode of operation (selector switch in the HEAT position), 4. Using your fingers, gently flip the switch towards the preferred temperature ˚F / ˚C scale. the thermostat will mechanically turn-off if the room temperature raises higher than 99˚F 5.

  • Page 7: Troubleshooting

    TROUBLESHOOTING TROUBLESHOOTING cont. SYMPTOM POTENTIAL SOLUTION SYMPTOM POTENTIAL SOLUTION Check to see if OFF is shown in display. This indicates that the Thermostat does not Low battery indicator Replace batteries immediately to maintain proper system system is turned off at the thermostat. Move the system turn on heating or operation.

  • Page 8: Wiring Diagrams

    TROUBLESHOOTING WIRING DIAGRAMS cont. Typical 2-Wire 24 Volt AC or 250mV - 750mV Millivolt Heating Systems SYMPTOM POTENTIAL SOLUTION Thermostat will not This is above the normal thermostat temperature setting range Remove of 45˚ to 90˚ F (7˚ to 32˚ C). allow me to program Factory Installed a setpoint...
  • Page 9 Volt AC instructions. Braeburn Systems LLC agrees to repair or replace at its option any Braeburn thermostat under warranty provided it is returned postage prepaid to our warranty facility in a padded carton within the warranty period, with proof of the original date of purchase and a brief description of the malfunction.

Table of Contents