4 Operating Your Thermostat
Setting the SYSTEM Control Mode
The System Control has 5 modes of operation – AUTO, COOL, OFF, HEAT and EMER. The mode can be selected
SYSTEM
by touching the
NOTE: Depending on how your thermostat was configured, some system modes may not be available.
AUTO
The system will cycle between heating and cooling
automatically based on your program set points.
AUTO will be displayed with either HEAT or COOL.
COOL
Only your cooling system will operate.
OFF
Heating and cooling systems are off.
HEAT
Only your heating system will operate
EMER
Operates a backup heat source (Emergency Heat)
for heat pump systems only (Model 5320 only).
TouchPad
to scroll through the different modes.
™
21
User Manual