Troubleshooting; Troubleshooting Resources; Important Safety Information; Symbols On Equipment - HP BladeSystem c7000 Setup And Installation Manual

6 Troubleshooting

Troubleshooting resources

The HP ProLiant Servers Troubleshooting Guide provides simple procedures for resolving common
problems as well as a comprehensive course of action for fault isolation and identification, error
message interpretation, issue resolution, and software maintenance.
To obtain the guide, refer to any of the following sources and then select the HP ProLiant Servers
Troubleshooting Guide:
The server-specific Documentation CD
The Business Support Center on the HP website: http://www.hp.com/go/bizsupport.

Important safety information

Familiarize yourself with the safety information in the following sections before troubleshooting the
server.

Symbols on equipment

58 Troubleshooting
This symbol indicates HP systems and peripherals that contain assemblies and components that
are sensitive to electrostatic discharge (ESD). Carefully observe the precautions and recommended
procedures in this document to prevent component damage from static electricity.
This symbol indicates the presence of hazardous energy circuits or electric shock hazards. Refer
all servicing to qualified personnel.
WARNING! To reduce the risk of injury from electric shock hazards, do not open this enclosure.
Refer all maintenance, upgrades, and servicing to qualified personnel.
This symbol indicates the presence of electric shock hazards. The area contains no user or field
serviceable parts. Do not open for any reason.
WARNING! To reduce the risk of injury from electric shock hazards, do not open this enclosure.
This symbol on an RJ-45 receptacle indicates a network interface connection.
WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not plug
telephone or telecommunications connectors into this receptacle.
This symbol indicates the presence of a hot surface or hot component. If this surface is contacted,
the potential for injury exists.
WARNING! To reduce the risk of injury from a hot component, allow the surface to cool before
touching.
This symbol indicates that the component exceeds the recommended weight for one individual
to handle safely.
WARNING! To reduce the risk of personal injury or damage to the equipment, observe local
occupational health and safety requirements and guidelines for manual material handling.