Transferring Calls; Holding Calls - NEC SV-8100 User Manual

TRANSFERRING CALLS

With a call in progress:
1. Press the Transfer key.
2. Dial the station number.
3. Announce the call (optional).
4. Replace the handset.
Note 1: If the called station is busy, replace the handset to
initiate a camp-on. Unanswered camp-ons and unscreened
transfers will recall to the transferring station.
Note 2: To return to the original party, press the GREEN
flashing key.
Call Transfer using programmed DSS keys
With a call in progress:
1. Press the programmed DSS button.
3. Announce the call (optional).
4. Replace the handset.
Note 1: A Programmable Function Key may be assigned for
DSS. (See programming a function in this manual)
Note 2: To transfer a call directly to a personal voice mailbox,
dial 8 after dialing the station number.

HOLDING CALLS

To retrieve a call you placed on hold using the HOLD button,
press the GREEN flashing key.
Note: Unless your system is programmed with a key for each
outside line, calls placed on hold using the Hold button can
ONLY BE PICKED UP AT YOUR extension.
10
DIALING SYSTEM/STATION SPEED DIALS
To dial a Speed dialing number:
1. Press the DIR key.
2. Press the SPD key for
SYSTEM numbers or STA
key for STATION numbers.
3. The [A] in the upper
right corner number
designates the letter A as
the alphabetical starting
point. To look for name starting
with an N, press 6 twice.
Use the up arrow to scroll all speed
numbers/names starting at N and proceeding through all
programmed speed dial numbers.
When you find the number you wish to call – press CALL – the
speakerphone will activate and the number will be dialed.
Note: This procedure is the same for both system and station
speed dialing. "SYS: COMMON" is replaced with "STATION" for
station speed numbers.
21 OCT THU 12:34PM
101 STA101
List Dir VMsg DN
21 OCT THU 12:34PM
SPD EXT. STA TELBK
DIRECTORY DIALING [A]
SYS: COMMON
UP DN DIAL
UP = up arrow
DN = down arrow
19