Station Speed Dial - Programming; Microphone Control; Background Music - NEC SV-8100 User Manual

STATION SPEED DIAL - PROGRAMMING

To store a Station Speed Dialing number (display telephones
only):
1. Press the Speaker key.
2. Dial 755.
3. Dial the Station Speed Dial buffer number to be
programmed (0~9).
1 = Station Speed Dial buffer 1
2 = Station Speed Dial buffer 2 etc.
Note: 0 = Station Speed Dial buffer 10
4. Dial the Access Code (e.g., 9) - if required.
5. Dial telephone number you want to store (up to 24 digits).
Note: Valid entries are 0~9, # and *. To enter a pause, press
MIC. To store a Flash, press Recall.
6. Press Hold.
7. Enter the name associated with the Speed Dialing number
(display telephones only):
# # = Accepts an entry (only required if two letters on the same
key are needed - ex: TOM). Pressing # again = Space. Conf
Clears the character entry one character at a time (used when
entering the Name). EXIT Clears all the entries from the point
of the flashing cursor and to the right (used when entering the
Number, this clears both the number and name).
20
PLACING CALLS - Internal Calls
1. Lift the handset.
2. Dial a station number or 0 for the attendant. OR Press the
button programmed for Direct Station Select.
3. Voice announce after the tone burst or wait for the ringing
call to be answered.
Note 1: When calling a multiline telephone, dialing 1 after the
station number will change ringing to voice or voice to ringing.
Note 2: To directly access a personal voice mailbox, dial 8 after
dialing the station number.
6
PLACING CALLS - Outside Calls
1. Lift the handset.
2. Typically dial 9 OR press an idle Outside Line key.
3. Dial the telephone number.
Changing how you receive intercom and transferred
calls
1. Lift the handset.
2. Dial 721 for handsfree answer back (display will show
VOICE) or 723 to make your phone ring (display will show
RINGING).
3. Hang up.

MICROPHONE CONTROL

Press the MIC key.
A lit MIC LED indicates that the MIC is on.

BACKGROUND MUSIC

To turn Background Music on or off:
1. Press the Speaker key.
2. Dial 725.
3. Press Speaker to hang up.
9