NEC SV-8100 User Manual page 7

PROGRAMMING ONE-TOUCH ICM KEYS
1. Press the Speaker key.
2. Dial Service Code 751.
3. Press the Line Key to be programmed. Screen should say
"Not Defined" or an old entry you can erase! Leave CAP Keys
in place or you will not be able to transfer calls!
4. Dial 01 followed by the extension number.
5. Press HOLD then Speaker
LINE KEYS – PROGRAMMABLE LINE KEYS
The following functions below can be assigned to Line Keys if
allowed by Class of Service.
To Program a Line key as a Programmable Function Key:
1. Press the Speaker key.
2. Dial Service Code 751.
3. Press the Line Key to be programmed.
4. Dial the code for the desired feature plus additional data if
required.
5. Press Speaker to hang up.
Note: Service Code 00 will erase the function from the key.
Note: In some cases, the Hold key needs to be pressed before
pressing the Speaker key.
CAUTION: CHECK WITH YOUR DIGITAL
COMMUNICATIONS TECHNICIAN BEFORE
CHANGING ANY FEATURE KEYS. YOU COULD
MAKE YOUR PHONE INOPERATABLE.
22
21 OCT THU 12:34PM
SPD EXT.
Softkey display when "DIR" is pressed
SPD – Press this key to open the SYSTEM speed dial screen for
accessing 1000 system numbers.
EXT. – Press this key to open a screen listing the extension
numbers by name.
STA – Press this key to open your personal bank of 10 station
numbers.
TELBK – Press this key to open the programmed telephone
book.
21 OCT THU 12:34PM
InPg ExPg
Your phone's display when the handset is lifted or the speaker
button is pressed prior to making a call.
InPg – Press this key to page an internal intercom group.
ExPg – Press this key to page thru an external paging system.
P/U – Press this key to use group or directed call pickup.
STA TELBK
P/U
7