Installing the Dishwasher
• The dishwasher must be installed on a firm floor
and adjusted to ensure that it is stable and level in
• To compensate for unevenness in the floor and to
match the height of the appliance to that of sur-
rounding units, extend the threaded feet using a
• The drain hose, inlet hose and mains cable must
be laid so that they are able to move freely within
the plinth area, and so that they are not kinked or
crushed when the dishwasher is in position.
• The dishwasher must also be screwed tightly to
the work surface or to the adjoining units. This is
essential to ensure the dishwasher does not tip up.
Dishwashers that can be fully inte-
(see installation template supplied)
The door of the appliance can be fitted with a
wooden door/cupboard door with the follow-
Using the installation template supplied, split cup-
board doors can be easily installed and firmly fitted.
591 mm - 594 mm
16 mm – 24 mm
max. 715 mm
max. 10 kg