Notes for Test Institutes
Testing in accordance with EN 60704 must be car-
ried out with the appliance fully loaded and using the
test cycle (see "Cycle Table").
Tests in accordance with EN 50242 must be car-
ried out when the salt dispenser in the water softener
and the rinse aid dispenser have been filled with salt
and rinse aid respectively, and using the test cycle
(see "Cycle Table").
Amount of detergent required:
Rinse aid setting:
Sample loading arrangements:
*)
Upper basket
*) If necessary, move the cup rack from right to left. When doing this, ensure that the cup rack is at the same height.
Lower basket with cutlery basket
*) If there are cup racks in place on the lefthand side or if beer glass holders are in place, remove them.
Full load:
12 place settings
including serving dishes
5g + 25g (Type B)
4 (Type III)
*)
Half load:
6 place settings including serving dish-
es, leaving alternate positions in the
rack free
20g (Type B)
4 (Type III)
Cutlery basket
29