Download Print this page

Electrolux ESL 6226 User Information page 25

Hide thumbs

Advertisement

Malfunction
1 short warning tone, continu-
ously repeated, can be heard,
the programme display for the se-
lected wash programme is flash-
ing:
the indicator for the end of the
wash programme is flashing once
continuously .
(problems with water inflow).
2 short warning tones, continu-
ously repeated, can be heard,
the programme display for the se-
lected wash programme is flash-
ing,
the indicator for the end of the
wash programme is flashing twice
continuously .
(Rinse water has collected in the
dishwasher's interior container).
3 short warning tones, continu-
ously repeated, can be heard,
the indicator for the end of the
wash programme is flashing three
times continuously .
The programme is not starting.
Rust spots are visible in the dish-
washing compartment.
A whistling noise can be heard
when washing dishes.
Possible cause
Tap is blocked with limescale or is
faulty.
The tap is turned off.
The filter (where present) in the
threaded hose fitting on the tap is
blocked.
Filters in the base of the washing
compartment are blocked.
Water inflow hose has not been
correctly positioned.
The siphon is blocked.
Water drain hose has not been cor-
rectly positioned.
The anti-flood system has been
triggered.
The mains plug is not plugged in.
A fuse in the house's wiring system
is defective.
For dishwasher models with a start
delay timer:
A start time has been selected.
The dishwashing compartment is
made from rust-free stainless steel.
Rust spots in the dishwashing com-
partment are due to rust particles
from external sources (rust particles
from water pipes, pans, cutlery,
etc.). Remove such spots with a
commercially available cleaning
product for stainless steel.
The whistling is not a cause for
concern.
Remedy
Check the tap and have it repaired, if
necessary.
Turn on the tap.
Clean the filter in the threaded hose
fitting.
Cancel the dishwashing cycle (see
chapter: Starting a dishwashing cy-
cle),
clean filters (see chapter: Cleaning
the filters),
then start the dishwashing cycle
again.
Check the position of the hose.
Clean the siphon.
Check the position of the hose.
First turn off the water tap, then
switch off the appliance and contact
customer service.
Connect the plug to a mains socket.
Replace fuse.
If the dishes are to be washed im-
mediately, cancel the start delay.
Only wash cutlery, dishes and pans
that are suitable for dishwasher use.
Decalcify appliance with commer-
cially available agents for cleaning
dishwashers.
If the noises can still be heard after
decalcifying the machine, use a dif-
ferent brand of detergent for wash-
ing cutlery and dishes.
25

Hide quick links:

Advertisement

loading

  Related Manuals for Electrolux ESL 6226