ENGLISH SAFETY INSTRUCTIONS Before the installation and use of the ap- • Always use a correctly installed shock- pliance, carefully read the supplied in- proof socket. structions. The manufacturer is not re- • Do not use multi-plug adapters and ex- sponsible if an incorrect installation and tension cables.
Page 4
www.electrolux.com • If the water inlet hose is damaged, im- • Dishwasher detergents are dangerous. mediately disconnect the mains plug Obey the safety instructions on the de- from the mains socket. Contact the tergent packaging. Service to replace the water inlet hose. •...
www.electrolux.com Indicators Description Salt indicator. It is always off while the programme operates. 4. PROGRAMMES Degree of Programme Duration Energy Water Programme soil phases (min) (kWh) Type of load Normal soil Prewash 130 - 140 1.0 - 14 - 16 Crockery and Wash 50 °C cutlery...
ENGLISH 5. OPTIONS Activate or deactivate the options 4. Press immediately Program. before the start of a programme. • The programme indicator You cannot activate or deactivate comes on with fixed light. the options while a programme • operates. The programme indicator starts to flash.
ENGLISH 6.3 Filling the salt container Turn the cap counterclockwise and open the salt container. Put 1 litre of water in the salt contain- er (only for the first time). Fill the salt container with dishwasher salt. Remove the salt around the opening of the salt container.
10 www.electrolux.com 7. DAILY USE 1. Open the water tap. 3. Load the baskets. 2. Press the on/off button to activate the 4. Add the detergent. appliance. 5. Set and start the correct programme • If the salt indicator is on, fill the salt for the type of load and the degree of container.
ENGLISH 5. Adjust the water softener to the water Opening the door while the hardness in your area. appliance operates 6. Adjust the released quantity of rinse If you open the door, the appliance stops. aid. When you close the door, the appliance continues from the point of interruption.
12 www.electrolux.com important to set the right level of the water • Do not put in the appliance items that softener. This makes sure that the water can absorb water (sponges, household softener uses the correct quantity of dish- cloths). washer salt and water.
ENGLISH 9.1 Cleaning the filters Turn the filter (A) counterclockwise and remove it. To disassemble the filter (A), pull apart (A1) and (A2). Remove the filter (B). Wash the filters with water. Put the filter (B) to its initial position. Make sure that it assembles correctly under the two guides (C).
Page 14
14 www.electrolux.com Alarm code Problem • The end indicator flashes 1 time in- The appliance does not fill with water. termittently. • Acoustic signal sounds 1 time inter- mittently. • The end indicator flashes 2 times in- The appliance does not drain the water. termittently.
ENGLISH • The quality of the detergent can be the 10.1 If the washing and drying cause. results are not satisfactory Dishes are wet Whitish streaks or bluish layers on • The programme is without a drying glasses and dishes phase or with a low temperature drying •...