Configuration; Ethernet Configuration - Lanier lp145n Hardware Manual

Ethernet Configuration

Make the following network settings according to the network interface you are
using.
You can use SmartDeviceMonitor for Admin or a Web browser to make IP ad-
dress-related settings in a TCP/IP-capable environment.
Important
❒ Configure the printer for the network using the control panel.
❒ The following table shows the control panel settings and their default values.
These items appear in the "Host Interface" menu.
Setting Name
DHCP
IPv4 Address
Subnet Mask
Gateway Address
Frame Type (NW)
Active Protocol
Ethernet Speed
LAN Type
Note
❒ If DHCP is in use, the IP address, subnet mask, and gateway address are all
set automatically.
❒ Make this setting only when it is necessary. See Software Guide.

4. Configuration

On
011.022.033.044
000.000.000.000
000.000.000.000
Auto
• IPv4:
Active
• IPv6:
Active
• NetWare:
Active
• SMB:
Active
• AppleTalk:
Active
Auto
Auto
Value
51