Paper Jam Inside Of The Equipment - Toshiba E-STUDIO 555 Troubleshooting Manual

1 TROUBLESHOOTING FOR THE HARDWARE
32
Remove the jammed paper.
33
Close the paper exit cover of the saddle stitch unit and the lower cover of the Saddle
Stitch Finisher.
34
Connect the finisher to the equipment.
Connect the finisher with the equipment while pressing the lock lever.
Place your hand on portion A in the figure and then move the finisher
carefully.
Be careful not to let your fingers be caught between the
finisher and the equipment.

Paper jam inside of the equipment

Be careful not to let your fingers be caught between the equipment and the External Large Capacity Feeder.
1
Separate the External Large Capacity Feeder
(optional) from the equipment when the External
Large Capacity Feeder is attached.
Move it slowly while pushing the lock lever.
2
Open the paper feed cover.
22 Clearing a Paper Jam
A