Antenna Connector - Omron V680 Series User Manual

DeviceNet Connector
The DeviceNet connector port connects the ID Slave to the DeviceNet Master Unit. Use the enclosed
connector.
Enclosed connector model: FKC2.5/5-ST-5.08-RFAUM (Phoenix Contact)
1
2
3
4
5
Power Supply Connector
The power supply terminals supply 24-VDC power using the enclosed connector.
Enclosed connector model: FKC2.5/3-ST-5.08-RF (Phoenix Contact)
1
2
3

Antenna Connector

Connect this connector to the V680-series Antenna (V680-HS@@).
1
2
Refer to System Configuration in Section 1 Product Overview for information on the Antennas that can be connected.
p.15
Names and Functions of Components
Pin No. Name
1 V− Power supply negative
side
2 CAN_L Low communications data
3 Drain Shield
4 CAN_H High communications
data
5 V+ Power supply positive side
Pin No. Name
1 +24VDC 24-VDC input terminals
2 GND
3 GR Ground terminal
Pin No. Name
1 S Signal line
2 GND Analog ground
Section 2
Signal type
Function
Signal type
RFID System
21
User's Manual