Resetting The Zyxel Device; Using The Reset Button; Figure 9 Select A Mode - ZyXEL Communications P-662H-61 User Manual

Chapter 2 Introducing the Web Configurator

Figure 9 Select a Mode

The management session automatically times out when the time period set in
the Administrator Inactivity Timer field expires (default five minutes). Simply
log back into the ZyXEL Device if this happens to you.

2.3 Resetting the ZyXEL Device

If you forget your password or cannot access the web configurator, you will need to use the
RESET button at the back of the ZyXEL Device to reload the factory-default configuration
file. This means that you will lose all configurations that you had previously and the password
will be reset to "1234".

2.3.1 Using the Reset Button

1 Make sure the POWER LED is on (not blinking).
2 Press the RESET button for 10 seconds or until the POWER LED begins to blink and
then release it. When the POWER LED begins to blink, the defaults have been restored
and the ZyXEL Device restarts.
You can also use the RESET button to:
• Activate/Deactivate the wireless network - by pressing the RESET button for 1 second.
• Start OTIST - by pressing the RESET button for 3 seconds.
46
P-662H/HW-D Series User's Guide