General Wireless Lan Screen; Figure 62 Wireless Lan: General - ZyXEL Communications P-662H-61 User Manual

Table 35 Additional Wireless Terms
TERM
Authentication
Max. Frame Burst
Fragmentation
Threshold
Roaming

7.5 General Wireless LAN Screen

If you are configuring the ZyXEL Device from a computer connected to the
wireless LAN and you change the ZyXEL Device's SSID or WEP settings, you
will lose your wireless connection when you press Apply to confirm. You must
then change the wireless settings of your computer to match the ZyXEL
Device's new settings.
Use this screen to configure the wireless settings on the ZyXEL Device. Click Network >
Wireless LAN to open the General screen.

Figure 62 Wireless LAN: General

P-662H/HW-D Series User's Guide
DESCRIPTION
The process of verifying whether a wireless device is allowed to use the
wireless network.
Enable this to improve the performance of both pure IEEE 802.11g and mixed
IEEE 802.11b/g networks. Maximum Frame Burst sets the maximum time that
the ZyXEL Device transmits IEEE 802.11g wireless traffic only.
A small fragmentation threshold is recommended for busy networks, while a
larger threshold provides faster performance if the network is not very busy.
If you have two or more ZyXEL Devices (or other wireless access points) on
your wireless network, you can enable this option so that wireless devices can
change locations without having to log in again. This is useful for devices,
such as notebooks, that move around a lot.
Chapter 7 Wireless LAN
117