7.8.3 Services
Please refer to
7.9 QoS Screen
Use this screen to configure QoS settings for the wireless traffic going through the ZyXEL
Device. The QoS screen by default allows you to automatically give a service a priority level
according to the ToS value in the IP header of the packets it sends.
7.9.1 ToS (Type of Service) and WMM QoS
ToS defines the DS (Differentiated Service) field in the IP packet header. The ToS value of
outgoing packets is between 0 and 255. 0 is the lowest priority.
WMM QoS checks the ToS in the header of transmitted data packets. It gives the application a
priority according to this number. If the ToS is not specified, then transmitted data is treated as
normal or best-effort traffic.
Click Network > Wireless LAN > QoS. The following screen displays.
Figure 76 Wireless LAN: QoS
The following table describes the fields in this screen.
Table 45 Wireless LAN: QoS
LABEL
QoS
Enable WMM QoS
P-662H/HW-D Series User's Guide
Appendix F on page 423
DESCRIPTION
Select the check box to enable WMM QoS on the ZyXEL Device.
for more information on commonly used services.
Chapter 7 Wireless LAN
131