Figure 26 Internet Connection With Enet Encap; Table 12 Internet Connection With Enet Encap - ZyXEL Communications P-662H-61 User Manual

Chapter 3 Wizard Setup for Internet Access
Table 11 Internet Connection with RFC 1483 (continued)
LABEL
Next
Exit

Figure 26 Internet Connection with ENET ENCAP

The following table describes the fields in this screen.

Table 12 Internet Connection with ENET ENCAP

LABEL
Obtain an IP
Address
Automatically
Static IP
Address
IP Address
Subnet Mask
Gateway IP
address
First DNS
Server
Second DNS
Server
Back
Apply
Exit
64
DESCRIPTION
Click Next to continue to the next wizard screen.
Click Exit to close the wizard screen without saving your changes.
DESCRIPTION
A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not
fixed; the ISP assigns you a different one each time you connect to the Internet.
Select Obtain an IP Address Automatically if you have a dynamic IP address.
A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not
fixed; the ISP assigns you a different one each time you connect to the Internet.
Select Static IP Address if your ISP gives you a fixed IP address.
Enter your ISP assigned IP address.
Enter a subnet mask in dotted decimal notation.
Refer to the appendices to calculate a subnet mask If you are implementing
subnetting.
You must specify a gateway IP address (supplied by your ISP) when you use ENET
ENCAP in the Encapsulation field in the previous screen.
Enter the IP addresses of the DNS servers. The DNS servers are passed to the DHCP
clients along with the IP address and the subnet mask.
As above.
Click Back to go back to the previous wizard screen.
Click Apply to save your changes back to the ZyXEL Device.
Click Exit to close the wizard screen without saving your changes.
P-662H/HW-D Series User's Guide