Configuring Advanced Lan Setup; Figure 56 Advanced Lan Setup; Table 29 Lan Ip; Table 30 Advanced Lan Setup - ZyXEL Communications P-662H-61 User Manual

The following table describes the fields in this screen.

Table 29 LAN IP

LABEL
TCP/IP
IP Address
IP Subnet Mask
Apply
Cancel
Advanced Setup

6.3.1 Configuring Advanced LAN Setup

Use this screen to edit your ZyXEL Device's advanced LAN settings. Click the Advanced
Setup button in the LAN IP screen. The screen appears as shown.

Figure 56 Advanced LAN Setup

The following table describes the labels in this screen.

Table 30 Advanced LAN Setup

LABEL
RIP & Multicast
Setup
RIP Direction
RIP Version
Multicast
P-662H/HW-D Series User's Guide
DESCRIPTION
Enter the IP address of your ZyXEL Device in dotted decimal notation, for
example, 192.168.1.1 (factory default).
Type the subnet mask assigned to you by your ISP (if given).
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to begin configuring this screen afresh.
Click this button to display the Advanced LAN Setup screen and edit more
details of your LAN setup.
DESCRIPTION
Select the RIP direction from None, Both, In Only and Out Only.
Select the RIP version from RIP-1, RIP-2B and RIP-2M.
IGMP (Internet Group Management Protocol) is a network-layer protocol used to
establish membership in a multicast group. The ZyXEL Device supports both IGMP
version 1 (IGMP-v1) and IGMP-v2. Select None to disable it.
Chapter 6 LAN Setup
107