Chapter 13 Content Access Control
13.2 Activating CAC and Creating User Groups
From the main menu click Security > Content Access Control and General to open the
configuration screen.
Use this screen to activate Content Access Control and set up the four user groups.
You must set up all four user groups.
Figure 112 Content Access Control: General
The following table describes the labels in this screen.
Table 74 Content Access Control: General
LABEL
Active
Content
Access
Control
Idle Timeout
Group List
Group Name
Restrictions
Time
196
DESCRIPTION
Select the check box to allow the LAN administrator to have control over a LAN user's
Internet access.
Type the time in minutes that elapses before the ZyXEL Device automatically
terminates the Internet session. The default time is 10 minutes.
These groups are used in conjunction with content filtering to decide which web pages
cannot be accessed by the user. You can set up to four user groups.
Enter the name of a user group for identification purposes.
Use the links below to configure the access restrictions for the user group.
Click the Edit (
)icon to set up the time allowances, start times and end times of
the day(s) when access is allowed.
P-662H/HW-D Series User's Guide