9.5 Configuring Port Forwarding
The Port Forwarding screen is available only when you select SUA Only in
the NAT > General screen.
If you do not assign a Default Server IP address, the ZyXEL Device discards
all packets received for ports that are not specified here or in the remote
management setup.
Click Network > NAT > Port Forwarding to open the following screen.
See
Appendix F on page 423
Figure 85 NAT Port Forwarding
The following table describes the fields in this screen.
Table 53 NAT Port Forwarding
LABEL
Default Server
Setup
Default Server
Port Forwarding
Service Name
Server IP
Address
Add
P-662H/HW-D Series User's Guide
Chapter 9 Network Address Translation (NAT) Screens
for port numbers commonly used for particular services.
DESCRIPTION
In addition to the servers for specified services, NAT supports a default server. A
default server receives packets from ports that are not specified in this screen. If
you do not assign a Default Server IP address, the ZyXEL Device discards all
packets received for ports that are not specified here or in the remote
management setup.
Select a service from the drop-down list box.
Enter the IP address of the server for the specified service.
Click this button to add a rule to the table below.
147