Bandwidth Management Rule Setup; Figure 160 Bandwidth Management: Rule Setup; Table 120 Bandwidth Management: Rule Setup - ZyXEL Communications P-662H-61 User Manual

P-662h series 802.11g adsl2+ 4-port security gateway
Hide thumbs Also See for P-662H-61:
Table of Contents

Advertisement

Chapter 19 Bandwidth Management
Table 119 Media Bandwidth Management: Summary (continued)
LABEL
Speed (kbps) Enter the amount of bandwidth for this interface that you want to allocate using
Scheduler
Max
Bandwidth
Usage
Apply
Cancel

19.8 Bandwidth Management Rule Setup

You must use the Bandwidth Management Summary screen to enable bandwidth
management on an interface before you can configure rules for that interface.
Click Advanced > Bandwidth MGMT > Rule Setup to open the following screen.

Figure 160 Bandwidth Management: Rule Setup

The following table describes the labels in this screen.

Table 120 Bandwidth Management: Rule Setup

LABEL
Direction
Service
282
DESCRIPTION
bandwidth management.
This appears as the bandwidth budget of the interface's root class. The
recommendation is to set this speed to match what the interface's connection can
handle. For example, set the WAN interface speed to 10000 kbps if the DSL connection
has an upstream speed of 10Mbps.
Select either Priority-Based or Fairness-Based from the drop-down menu to control
the traffic flow.
Select Priority-Based to give preference to bandwidth classes with higher priorities.
Select Fairness-Based to treat all bandwidth classes equally.
Select this check box to have the ZyXEL Device divide up all of the interface's
unallocated and/or unused bandwidth among the bandwidth classes that require
bandwidth. Do not select this if you want to reserve bandwidth for traffic that does not
match a bandwidth class or you want to limit the speed of this interface (see the Speed
field description).
Click Apply to save your settings back to the ZyXEL Device.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
Select the direction of traffic to which you want to apply bandwidth management.
Select a service for your rule or you can select User Defined to go to the screen
where you can define your own.
P-662H/HW-D Series User's Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents