Address Mapping; Figure 87 Address Mapping Rules - ZyXEL Communications P-662H-61 User Manual

Table 54 Port Forwarding Rule Setup (continued)
LABEL
Server IP
Address
Back
Apply
Cancel

9.6 Address Mapping

The Address Mapping screen is available only when you select Full Feature
in the NAT > General screen.
Ordering your rules is important because the ZyXEL Device applies the rules in the order that
you specify. When a rule matches the current packet, the ZyXEL Device takes the
corresponding action and the remaining rules are ignored. If there are any empty rules before
your new configured rule, your configured rule will be pushed up by that number of empty
rules. For example, if you have already configured rules 1 to 6 in your current set and now you
configure rule number 9. In the set summary screen, the new rule will be rule 7, not 9. Now if
you delete rule 4, rules 5 to 7 will be pushed up by 1 rule, so old rules 5, 6 and 7 become new
rules 4, 5 and 6.
To change your ZyXEL Device's address mapping settings, click Network > NAT > Address
Mapping to open the following screen.

Figure 87 Address Mapping Rules

P-662H/HW-D Series User's Guide
Chapter 9 Network Address Translation (NAT) Screens
DESCRIPTION
Enter the inside IP address of the server here.
Click Back to return to the previous screen.
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to begin configuring this screen afresh.
149