Replacing An Auxiliary Light Bulb; Troubleshooting - Yamaha TMAX XP500 Owner's Manual

Replacing an auxiliary light
bulb
1. Remove panel A. (See page 6-8.)
2. Remove the auxiliary light socket
(together with the bulb) by pulling it
out.
1
1. Auxiliary light bulb socket
3. Remove the burnt-out bulb by pull-
ing it out.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU52050
1
1. Auxiliary light bulb
2. Auxiliary light bulb socket
4. Insert a new bulb into the socket.
5. Install the auxiliary light socket (to-
gether with the bulb) by pushing it
in.
6. Install the panel.

Troubleshooting

2
Although Yamaha scooters receive a
thorough inspection before shipment
from the factory, trouble may occur dur-
ing operation. Any problem in the fuel,
compression, or ignition systems, for
example, can cause poor starting and
loss of power.
The following troubleshooting charts
represent quick and easy procedures
for checking these vital systems your-
self. However, should your scooter re-
quire any repair, take it to a Yamaha
dealer, whose skilled technicians have
the necessary tools, experience, and
know-how to service the scooter prop-
erly.
Use only genuine Yamaha replace-
ment parts. Imitation parts may look like
Yamaha parts, but they are often inferi-
or, have a shorter service life and can
lead to expensive repair bills.
When checking the fuel system, do
not smoke, and make sure there are
no open flames or sparks in the ar-
ea, including pilot lights from water
6-35
WARNING
EAU25881
2
3
4
5
6
7
8
9
EWA15141