Replacing The License Plate Light Bulb; Replacing An Auxiliary Light Bulb - Yamaha CRYPTON T110C Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
Replacing the license plate
light bulb
1. Remove the license plate light cov-
er by removing the screw.
1
2
1. License plate light cover
6
2. Screw
2. Remove the burnt-out bulb by pull-
ing it out from the socket.
1
1. License plate light bulb
EAU47910 3. Insert a new bulb into the socket.
4. Install the license plate light cover
by installing the screw.
6-30
Replacing an auxiliary light
bulb
This model is equipped with two auxil-
iary lights. If an auxiliary light bulb burns
out, replace it as follows.
1. Remove cowling A. (See page
6-6.)
2. Remove the auxiliary light bulb
socket (together with the bulb) by
pulling it out.
1. Auxiliary light bulb socket
3. Remove the burnt-out bulb by pull-
ing it out.
EAUW0343
1