License Plate Light; Replacing The Auxiliary Light Bulb (For Che) - Yamaha Aerox R NS50F Owner's Manual

3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw. NOTICE: Do not over-
tighten the screw, otherwise the
lens may break.
[ECA11192]
PERIODIC MAINTENANCE AND ADJUSTMENT

License plate light

If the license plate light does not come
on, have a Yamaha dealer check the
electrical circuit or replace the bulb.
6-28
EAU24331
Replacing the auxiliary light
bulb (for CHE)
If the auxiliary light bulb burns out, re-
place it as follows.
1. Place the vehicle on the center-
stand.
2. Remove cowling A. (See page
6-6.)
3. Remove the auxiliary light bulb
socket (together with the bulb) by
pulling it out.
ZAUM0940
1. Auxiliary light bulb socket
4. Remove the burnt-out bulb by
pulling it out.
EAU45465
6
1