Yamaha TMAX XP500 Owner's Manual page 21

1
2
1. Tripmeter/fuel reserve tripmeter
2. Ambient temperature/average fuel con-
sumption/instantaneous fuel consumption
1
1. Clock
The multi-function display is equipped
with the following:

a fuel meter

a coolant temperature meter
INSTRUMENT AND CONTROL FUNCTIONS

an odometer

two tripmeters (which show the
distance traveled since they were
last set to zero)

a fuel reserve tripmeter (which
shows the distance traveled when
the remaining fuel in the fuel tank
reaches approximately 3.0 L (0.79
US gal, 0.66 Imp.gal))

a self-diagnosis device

a clock

an ambient temperature display

a fuel consumption display (aver-
age and instantaneous consump-
tion functions)

an oil change tripmeter (which
shows the distance traveled since
the last engine oil change)

a V-belt replacement tripmeter
(which shows the distance trav-
eled since the last V-belt replace-
ment)
TIP

Be sure to turn the key to "ON" be-
fore using the left and right set but-
tons.

When the key is turned to "ON", all
of the display segments of the
3-6
multi-function display will appear
one after the other and then disap-
pear, in order to test the electrical
circuits.
Clock
1
1. Clock
To set the clock:
1. Push the left set button and right
set button together for at least two
seconds.
2. When the hour digits start flashing,
push the right set button to set the
hours.
3. Push the left set button, and the
minute digits will start flashing.
4. Push the right set button to set the
2
3
4
5
6
7
8
9