Operation And Important Riding Points; Starting The Engine - Yamaha TMAX XP500 Owner's Manual

OPERATION AND IMPORTANT RIDING POINTS

Read the Owner's Manual carefully to
become familiar with all controls. If
1
there is a control or function you do not
understand, ask your Yamaha dealer.
2
WARNING
3
Failure to familiarize yourself with
the controls can lead to loss of con-
trol, which could cause an accident
4
or injury.
5
6
7
8
9
EAU15951
TIP
This model is equipped with:

a lean angle sensor to stop the en-
gine in case of a turnover. In this
EWA10271
case, the multi-function display in-
dicates error code 30, but this is
not a malfunction. Turn the key to
"OFF" and then to "ON" to clear the
error code. Failing to do so will pre-
vent the engine from starting even
though the engine will crank when
pushing the start switch.

an engine auto-stop system. The
engine stops automatically if left
idling for 20 minutes. If the engine
stops, simply push the start switch
to restart the engine.
EAU48710

Starting the engine

NOTICE
See page 5-4 for engine break-in in-
structions prior to operating the ve-
hicle for the first time.
In order for the ignition circuit cut-off
system to enable starting, the side-
stand must be up.
See page 3-27 for more information.
1. Turn the key to "ON" and make
NOTICE
If the above warning light, indicator
light, or indicators do not come on
initially when the key is turned to
"ON", or if a warning light, indicator
5-1
sure that the engine stop switch is
set to " ".
The following warning light, indica-
tor light and indicators should
come on for a few seconds, then
go off.

Engine trouble warning light

Immobilizer system indicator
light

V-belt replacement indicator

Oil change indicator
EAU54010
ECA10250
ECA17820