Yamaha TMAX XP500 Owner's Manual page 22

INSTRUMENT AND CONTROL FUNCTIONS
minutes.
5. Push the left set button and then
release it to start the clock.
1
Odometer and tripmeter modes
2
1
3
4
5
6
1. Odometer/tripmeters/fuel reserve tripme-
ter
7
8
1
9
1. Oil change tripmeter
1
1. V-belt replacement tripmeter
Pushing the left set button switches the
display between the odometer mode
and the tripmeter modes in the follow-
ing order:
Odo  Trip 1  Trip 2  V-Belt Trip 
Oil Trip  Odo
When approximately 3.0 L (0.79 US
gal, 0.66 Imp.gal) of fuel remains in the
fuel tank, the display will automatically
change to the fuel reserve tripmeter
mode "Trip F" and start counting the
distance traveled from that point. In that
case, pushing the left set button switch-
es the display between the various trip-
meter and odometer modes in the
following order:
Odo  Trip 1  Trip 2  Trip F 
3-7
V-Belt Trip  Oil Trip  Odo
1
1. Fuel reserve tripmeter
To reset a tripmeter, select it by push-
ing the left set button until "Trip F", "Trip
1" or "Trip 2" is displayed. While "Trip
F", "Trip 1" or "Trip 2" is displayed, push
the left set button for at least one sec-
ond. If you do not reset the fuel reserve
tripmeter manually, it will reset itself au-
tomatically and the display will return to
the prior mode after refueling and trav-
eling 5 km (3 mi).
TIP
The display cannot be changed back to
"Trip F" after pushing the left set button.
Fuel meter
With the key in the "ON" position, the