License Plate Light; Replacing The Auxiliary Light Bulb - Yamaha Neo's 4 YN50FU Owner's Manual

License plate light

If the license plate light does not come
on, have a Yamaha dealer check the
electrical circuit or replace the bulb.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU24331
Replacing the auxiliary light
bulb
If the auxiliary light bulb burns out, re-
place it as follows.
1. Place the vehicle on the center-
stand.
2. Remove cowling A. (See page
6-6.)
3. Remove the auxiliary light bulb
socket (together with the bulb) by
pulling it out.
1. Auxiliary light bulb socket
4. Remove the burnt-out bulb by
pulling it out.
6-28
EAU45465
1. Auxiliary light bulb
5. Insert a new bulb into the socket.
6. Install the socket (together with
the bulb) by pushing it in.
7. Install the cowling.
6