Tail/Brake Light; Replacing A Front Turn Signal Light Bulb - Yamaha TMAX XP500 Owner's Manual

Tail/brake light

This model is equipped with an
LED-type tail/brake light.
If the tail/brake light does not come on,
have a Yamaha dealer check it.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU24181
Replacing a front turn signal
light bulb
1. Place the scooter on the center-
stand.
2. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
1. Turn signal light bulb socket
3. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
EAU52320
1. Turn signal light bulb
2. Turn signal light bulb socket
1
6-33
2
1
4. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
5. Install the socket (together with the
bulb) by turning it clockwise.
2
3
4
5
6
7
8
9