Yamaha TMAX XP500 Owner's Manual page 45

Hide thumbs Also See for TMAX XP500:
Table of Contents

Advertisement

ITEM
Rear brake
Throttle grip
Wheels and tires
Brake levers
Centerstand, sidestand
Chassis fasteners
Instruments, lights, signals
and switches
Sidestand switch
FOR YOUR SAFETY – PRE-OPERATION CHECKS
• Check operation.
• If soft or spongy, have Yamaha dealer bleed hydraulic system.
• Check brake pads for wear.
• Replace if necessary.
• Check fluid level in reservoir.
• If necessary, add specified brake fluid to specified level.
• Check hydraulic system for leakage.
• Make sure that operation is smooth.
• Check throttle grip free play.
• If necessary, have Yamaha dealer adjust throttle grip free play and lubricate
cable and grip housing.
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
• Make sure that operation is smooth.
• Lubricate pivots if necessary.
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
• Check operation.
• Correct if necessary.
• Check operation of ignition circuit cut-off system.
• If system is not working correctly, have Yamaha dealer check vehicle.
CHECKS
4-2
PAGE
6-20, 6-22, 6-23
2
3
6-17, 6-25
4
6-17, 6-19
5
6-25
6
6-26
7
8
3-26
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tmax xp500aTmax 530Tmax xp500Tmax xp500a

Table of Contents