Switch Setup; Chapter 9 Switch Setup; Figure 21 Switch Setup; Table 11 Switch Setup - ZyXEL Communications MI-7248 User Manual

C
H A P T E R

9.1 Switch Setup

Use this screen to configure MAC address learning, declaration timeout values for GARP, and
priority queues. You can also control whether or not the switch handles bridge control
protocols, such as STP. To open this screen, click Basic Setting > Switch Setup.

Figure 21 Switch Setup

The following table describes the labels in this screen.

Table 11 Switch Setup

LABEL
Bridge Control
Protocol
Transparency
MAC Address
Learning
Aging Time
MS-7206 User's Guide
DESCRIPTION
Select Active to allow the switch to handle bridging control protocols (STP for
example). You also need to define how to treat a BPDU in the Port Setup screen.
MAC address learning reduces outgoing traffic broadcasts. For MAC address
learning to occur on a port, the port must be active.
Enter a time from 10 to 3000 seconds. This is how long all dynamically learned MAC
addresses remain in the MAC address table before they age out (and must be
relearned).

Switch Setup

9
71