Table 83 General Commands for GUI-based FTP Clients (continued)
COMMAND
Transfer Type
Initial Remote
Directory
Initial Local Directory
37.2.4 FTP Restrictions
FTP will not work when:
• FTP service is disabled in the Service Access Control screen.
• The IP address(es) in the Remote Management screen does not match the client IP
address. If it does not match, the switch will disconnect the Telnet session immediately.
MS-7206 User's Guide
DESCRIPTION
Transfer files in either plain text format (ASCII) or in binary mode.
Configuration and firmware files should be transferred in binary mode.
Specify the default remote directory (path).
Specify the default local directory (path).
Chapter 37 Maintenance
221