Fujitsu ETERNUS DX60 S2 User Manual page 65

Chapter 5 Installing Optional Products
5.2 Installing Drive Enclosures
2
■ For the EMEA&I region
ETERNUS DX60 S2 Disk storage system User's Guide -Operation-
Attach the rack rails to the rack.
(1)
Attach the 2U rack rail to the left rear rack pillar.
The M5 centering screws should be inserted in the 1st and 6th holes above the base
line of the controller enclosure.
2U Bracket
(2)
Insert the pins of the left slide rail in the 1st and 3rd holes from the bottom of the 2U
rack rail.
(3)
Secure the left slide rail to the front pillar using the M5 centering screw and M5 pan
head screws.
(4)
For the right slide rail, insert the pins in the holes of the rear pillar, and secure the other
side of the slide rail to the front pillar in the same way as the left slide rail.
Copyright 2013 FUJITSU LIMITED
M5 Centering screws (10mm)
65
M5 Centering screw (10mm)
M5 Cage nut
M5 Pan head screw (10mm)
P3AM-5512-05ENZ0