Figure 1.15 Power Supply Unit - Fujitsu ETERNUS DX60 S2 User Manual

Chapter 1 Components
1.1 Controller Enclosure
1.1.4.2 Power Supply Units
The power supply unit transforms input AC power from a power socket to DC power and supplies
power to each component.
Each power supply unit contains fans.

Figure 1.15 Power supply unit

●
Part explanation
• Inlet
This inlet is used to connect a power cord.
• LEDs
The states of LEDs are listed below.
Table 1.7
STATUS
ETERNUS DX60 S2 Disk storage system User's Guide -Operation-
STATUS LED
Status and meanings of each LED (power supply unit)
LED name LED status
(green)
(blinks green)
(orange)
Copyright 2013 FUJITSU LIMITED
Inlet
Power supply unit status
AC power is supplied to the power supply unit and the
ETERNUS DX Disk storage system (DC power) is
turned on.
AC power is supplied to the power supply unit but the
ETERNUS DX Disk storage system (DC power) is not
turned on.
The power supply unit or the fan in the power supply
unit is in error status.
22
P3AM-5512-05ENZ0