Fujitsu ETERNUS DX60 S2 User Manual page 122

Appendix B Event (SNMP Trap) Display When Using ServerView Operation Manager
Alarm type
(--#TYPE)
Item warning to
normal (*2)
Sensor status
change to
normal (*2)
*1: For variable-bindings values, refer to
(page
*2: The default setting is "Disable" (no notification).
ETERNUS DX60 S2 Disk storage system User's Guide -Operation-
Display contents of the ServerView Operation Manager
Severity
(--#SEVERITY)
INFORMATIONAL Item warning to normal, from %s, id: %x[%x],
message: %s
%s: fjdarySspMachineId
%x: fjdaryTrapItemId
%x: fjdaryTrapWarningInfo
%s: fjdaryTrapMessage
INFORMATIONAL Sensor status changed to normal, from %s, id:
%x[%x], message: %s
%s: fjdarySspMachineId
%x: fjdaryTrapItemId
%x: fjdaryTrapSensorInfo
%s: fjdaryTrapMessage
94).
122
Copyright 2013 FUJITSU LIMITED
Details (--#SUMMARY)
variable-bindings (*1) for %s, %x
"variable-bindings meanings" (page 94)
SNMP Trap type
specific
Meaning
trap No.
25 An event notified by
"Item warning"
returns to normal
status
26 An event notified by
"Sensor status
changed" returns to
normal status
in "A.1.3 Host Sense"
P3AM-5512-05ENZ0