HP 5400 ZL series Quickspecs page 84

QuickSpecs
Accessory Product Details
HP X244 XFP SFP+ 1 m
Direct Attach Cable
(J9300A)
A 1m direct attach copper
cable with an XFP
connector attached on one
end and an SFP+ connector
attached on the other end.
This cable
provides a low price
connectivity option
between switches/servers/
storage to interconnect
XFP and SFP+ form factors.
Notes
Services
Connectivity
Physical characteristics
Environment
Notes
Services
DA - 12436 North America — Version 34 — December 9, 2014
Electrical Properties:
• Cable Characteristic Impedance: 100 ohms
Physical Properties:
• Cable Diameter: 0.255"
• Minimum Cable Bend Radius: 0.765"
Refer to the HP website at www.hp.com/networking/services
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Length
Weight
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Altitude
XFP end consumes 2 watts SFP+ end consumes 0.036 watts
Refer to the HP website at www.hp.com/networking/services
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP 5400 zl Switch Series
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in, and all modules
populated.
0.6 watts maximum per transceiver end
3.28 ft. (1 m)
.27 lb. (0.12 kg), Fully loaded cable with XFP
transcevier on one end and SFP+ on the other end
32ºF to 158ºF (0ºC to 70ºC)
5% to 95%, noncondensing
32ºF to 158ºF (0ºC to 70ºC)
5% to 95%, noncondensing
up to 10,000 ft. (3 km)
for details on
for details on
Page 84