HP 5400 ZL series Quickspecs page 67

QuickSpecs
Accessory Product Details
HP X131 10G X2 SC ER
Transceiver (J8438A)
HP X131 10G X2 SC ER
Transceiver: An X2 format
10-gigabit transceiver with
SC connectors using ER
technology.
HP X130 CX4 Optical
Media Converter (J8439A)
An optical media converter
that connects to CX4 ports,
providing 10-Gigabit
connectivity up to 300 m
on multimode fiber.
Ports
Connectivity
Physical characteristics
Environment
Electrical characteristics Power consumption
Cabling
Notes
Services
Physical characteristics
Cabling
Notes
DA - 12436 North America — Version 34 — December 9, 2014
1 SC 10-GbE port (IEEE 802.3ae Type 10GBASE-ER); Duplex: full only
Connector type
Wavelength
Dimensions
Weight
Transceiver form factor
Operating temperature
Operating relative
humidity
typical
Power consumption
maximum
Cable type::
Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and
ISO/IEC 793-2 Type B1;
Cable length
Fiber type
Conditioning patch cord cables are not supported
For fiber patch cords, use Ultra Physical Contact (UPC) surface
termination/polish. Angled Physical Contact (APC) is not recommended.
Refer to the HP website at www.hp.com/networking/services
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Dimensions: 2.83(d) x 0.98(w) x 0.59(h) in. (7.19 x 2.49 x 1.5 cm)
Weight: 0.06 lb. (0.03 kg)
Maximum distance:
62.5 µm multimode cable @ 150 MHz*km = 1-50 meters
50 µm multimode cable @ 500 MHz*km = 1-100 meters
50 µm multimode cable @ 2000 MHz*km = 1-300 meters
Duplex: full
The CX4 Media Converter connects directly to the CX4 port, and a 12-strand
multimode ribbon cable is used between CX4 Media Converters.
The 12-strand multimode ribbon cable can have either 62.5 or 50 micron core
diameters, terminated by standard Multiple Terminations Push-pull Latch
(MTP) connectors in a crossover configuration. The ribbon cables are known as
Multi-fiber Push (MPO).
Users should specify a "crossover" (often called "key up/key up")
configuration for the ribbon cable. Also, specify female-female cables to
connect to HP 10-GbE CX4 Media Converters.
HP 5400 zl Switch Series
SC
1550 nm
3.48(d) x 1.42(w) x 0.43(h) in. (8.84 x 3.61 x 1.09
cm)
0.35 lb. (0.16 kg)
X2
32ºF to 104ºF (0ºC to 40ºC)
15% to 95%, noncondensing
3 W
4.5 W
2m to 30km (max 40km on engineered links)
Single Mode
for details on
Page 67