HP 5400 ZL series Quickspecs page 82

QuickSpecs
Accessory Product Details
HP X242 SFP+ SFP+ 7 m
Direct Attach Cable
(J9285B)
Services
Connectivity
Physical characteristics
Environment
Electrical characteristics Notes
Notes
Services
DA - 12436 North America — Version 34 — December 9, 2014
Physical Properties
• Cable Diameter: 0.180"
• Minimum Cable Bend Radius: 1.0"
Refer to the HP website at:
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Length
Weight
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Altitude
Electrical Properties
• Cable Characteristic Impedance: 100 ohms
• Crosstalk between pairs: 2% max
• Time delay: 1.31 nsec/ft
Physical Properties
• Cable Diameter: 0.180"
• Minimum Cable Bend Radius: 1.0"
Refer to the HP website at:
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP 5400 zl Switch Series
www.hp.com/networking/services
22.97 ft. (7 m)
1.02 lb., Fully loaded the cable with an SFP+
transceiver at each end of the cable
32ºF to 158ºF (0ºC to 70ºC)
5% to 95%, noncondensing
14ºF to 185ºF (-10ºC to 85ºC)
5% to 95%, noncondensing
up to 10,000 ft. (3 km)
0.04 watts maximum per transceiver end
www.hp.com/networking/services
for details on
for details on
Page 82