HP 5400 ZL series Quickspecs page 42

QuickSpecs
Technical Specifications
Power supplies
Physical characteristics
Memory and processor
Mounting
Performance
Environment
Electrical characteristics Frequency
Safety
DA - 12436 North America — Version 34 — December 9, 2014
4 power supply slots
2 minimum power supplies required
includes: 2 x J9306A (HP 1500W PoE+ zl Power Supply)
Dimensions
Weight
Gigabit Module
10G module
Management Module
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware
included); horizontal surface mounting only
1000 Mb Latency
10 Gbps Latency
Throughput
Routing/Switching
capacity
Switch fabric speed
Routing table size
MAC address table size
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Altitude
Acoustic
Description
Maximum heat
dissipation
Voltage
Idle power
CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950
HP 5400 zl Switch Series
17.5(w) x 17.75(d) x 12.1(h) in (44.45 x 45.09 x
30.73 cm) (7U height)
74.86 lb (33.96 kg)
ARM9 @ 200 MHz; packet buffer size: 144 Mb QDR
SDRAM
ARM9 @ 200 MHz; packet buffer size: 36 Mb QDR
SDRAM
Freescale PowerPC 8540 @ 666 MHz, 4 MB flash
Mb, 128 MB compact flash, 256 MB DDR SDRAM
< 3.7 µs (FIFO 64-byte packets)
< 2.1 µs (FIFO 64-byte packets)
up to 564.2 million pps
758.4 Gbps
758.4 Gbps
10000 entries (IPv4), 5000 entries (IPv6)
64000 entries
32°F to 131°F (0°C to 55°C); 0°C to 40°C with
J8706A or J8707A modules installed
15% to 95% @ 131°F (55°C), noncondensing
-40°F to 158°F (-40°C to 70°C)
15% to 95% @ 149°F (65°C), noncondensing
up to 10,000 ft (3 km)
Power: 64 dB, Pressure: 57.5 dB ISO 7779, ISO
9296
50/60 Hz
Two J9306A installed. Two open power supply
slots are available; three different power supplies
are available. See power supply products for
additional specifications.
4900 BTU/hr (5169.5 kJ/hr), (max. non-PoE);
7400 BTU/hr (7807 kJ/hr) (max. using PoE)
110-127/200-240 VAC
312 W
Page 42