HP 5400 ZL series Quickspecs page 4

QuickSpecs
Overview
provides per-port, per-queue egress-based reduced bandwidth
Class of Service (CoS)
sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source
port, and DiffServ
Management
Remote intelligent mirroring
mirrors selected ingress/egress traffic based on ACL, port, MAC address, or VLAN to a local or remote HP 8200 zl, 6600, 6200 yl,
5400 zl, or 3500 Switch located anywhere on the network
RMON, XRMON, and sFlow v5
provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network
management applications
Uni-Directional Link Detection (UDLD)
monitors a cable between two switches and shuts down the ports on both ends if the cable is broken, turning the bidirectional
link into a unidirectional one; this prevents network problems such as loops
Management simplicity
provides common software features and CLI implementation across all HP ProVision-based switches (including the zl and yl
switches)
Command authorization
leverages RADIUS to link a custom list of CLI commands to an individual network administrator's login; an audit trail documents
activity
Friendly port names
allow assignment of descriptive names to ports
Dual flash images
provide independent primary and secondary operating system files for backup while upgrading
Multiple configuration files
can be stored to the flash image
NEW Comware CLI
Comware-compatible CLI
bridges the experience of Comware CLI users who are using the ProVision software CLI
Display and fundamental Comware CLI commands
are embedded in the switch CLI as native commands; display output formatted as on Comware-based switches;
fundamental commands provide a Comware-familiar initial switch setup
Configuration Comware CLI commands
entered Comware CLI configuration commands elicit CLI help formulating the correct ProVision software CLI command
Connectivity
IEEE 802.3az Energy Efficient Ethernet
lowers power consumption in periods of low link usage (supported on v2 zl 10/100/1000 and 10/100 modules)
IEEE 802.3af Power over Ethernet (PoE)
provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and
security cameras
IEEE 802.3at Power over Ethernet Plus
provides up to 30 W per port to IEEE 802.3 for PoE- and PoE+-powered devices, such as video IP phones, IEEE 802.11n wireless
access points, and advanced pan/zoom/tilt security cameras
Prestandard PoE support
DA - 12436 North America — Version 34 — December 9, 2014
HP 5400 zl Switch Series
Page 4