HP 5400 ZL series Quickspecs page 20

QuickSpecs
Configuration
High Volt Switch to Wall Power Cord
NEMA L6-20P Cord (NA/MEX/JP/TW)
HP 1500 W zl Power Supply
C20 Outlet
C19 PDU WW
C19 to C20 Jumper Cord
High Volt Switch to Wall Power Cord
NEMA L6-20P Cord (NA/MEX/JP/TW)
Configuration Rules:
Note 1 Power Supplies cannot be mixed for a switch enclosure
Note 2 Localization required on orders without #B2B, #B2C or #B2E options.
Note 5 This power supply is not supported on the J9533Ax, J9539Ax, J9532Ax, J9866A and J9540x switches.
Note 6 If #B2E is selected Then replace Localized option with #B2E for power supply and with #B2E for switch . (Offered
only in NA, Mexico,, Taiwan, and Japan)
Remarks:
"Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and Japan or #B2C ROW.
(Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and Box Level CTO)
High Volt Switch/Router/Power Supply to Wall Power Cord - #B2E Option. (Offered only in North America, Mexico,
Taiwan, and Japan)"
Enter the following menu selections as integrated to the CTO Model X server above if order is factory built.
Modules
J9642x only - System (std 0 // max=6) User Selection (min 0 / max=6) per Chassis
J9643x only - System (std 0 // max=12) User Selection (min 0 / max=12) per Chassis
J9533x, J9539x, J8699x, J9447x, J9866A only - System (std 2 // max=6) User Selection (min 0 / max=4) per Chassis
DA - 12436 North America — Version 34 — December 9, 2014
HP 5400 zl Switch Series
J8712A#B2E
J8713A
See Configuration
Note:1, 2, 5, 6
J8713A#B2D
J8713A#B2E
Page 20