HP 5400 ZL series Quickspecs page 71

QuickSpecs
Accessory Product Details
HP X131 10G X2 SC LRM
Transceiver (J9144A)
An X2 form-factor
transceiver that supports
the 10-Gigabit LRM
standard, providing 10-
Gigabit connectivity up to
220 m on legacy
multimode fiber.
Ports
Physical characteristics
Environment
Electrical characteristics Power consumption
Cabling
Notes
Services
DA - 12436 North America — Version 34 — December 9, 2014
1 SC 10-GbE port (IEEE 802.3aq Type 10GBASE-LRM); Duplex: full only
Dimensions
Weight
Transceiver form factor
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Altitude
typical
Power consumption
maximum
Cable type:
62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal
content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2
Type A1b or A1a, respectively (a mode conditioning patch cord may be needed
in some multimode fiber installations);
Maximum distance:
• 0.5-220m with 62.5 µm multimode cable @ 160/500 MHz*km
• 0.5-220m with 62.5 µm multimode cable @ 200/500 MHz*km
• 0.5-100m with 50 µm multimode cable @ 400/400 MHz*km
• 0.5-220m with 50 µm multimode cable @ 500/500 MHz*km
• 0.5-220m with 50 µm multimode cable @ 1500/500 MHz*km
Cable length
Fiber type
Wavelength: 1310nm
For OM3 cable (50 ìm multimode @ 1500/500 MHz*km), a mode-conditioning
patch cord is not required. Other multimode cables may require mode-
conditioning patch cords to achieve the maximum distances listed above.
For supported platforms and minimum software requirements to support this
product, see the document titled "Support for the J9144A 10-GbE X2-SC LRM
Optic" on the "HP 10-GbE Transceivers" Manuals Web page.
Power Consumption: 4W Max
Refer to the HP website at www.hp.com/networking/services
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP 5400 zl Switch Series
3.54(d) x 1.59(w) x 0.7(h) in. (9.0 x 4.05 x 1.78 cm)
0.35 lb. (0.16 kg)
X2
32ºF to 158ºF (0ºC to 70ºC)
0% to 95%, noncondensing
-40ºF to 185ºF (-40ºC to 85ºC)
up to 10,000 ft. (3 km)
3.2 W
4.2 W
.5m to 220m
Multi Mode
for details on
Page 71