Blade Installation - Casablanca ALESSANDRIA Owner's Manual

BLADE HARDWARE (not to scale)
Blade Ring Mounting
Blade Ring
Attach Blade Irons
Step 10. Attach blade to bladeholder by fi rst pressing
the blade badge onto the blade, then attaching the
bladeholder using the four blade screws provided.
Using the provided screwdriver, tighten securely
by hand only until the screws are inserted to the
recessed point of the blade irons. Repeat for each
blade assembly.

Blade Installation

Step 11. Attach the blade/blade holder assembly to
the blade ring by using two blade holder screws for
each blade as shown in Figure #2. Insert the end of
the bladeholder into the slot on the blade ring. Install
the screws one by one using the provided screwdriver.
Tighten securely by hand only. Repeat for each blade/
bladeholder assembly.
Attach Blade Ring
Step 12a. Once all fi ve blades have been assembled
and installed onto the blade ring as shown in Figure #3,
install the blade ring assembly onto the fan body.
Step 12b. Align the fi ve mounting holes with the
rubber grommet on the blade ring assembly as shown
in Figure #4 with the holes on the motor. Using the
blade ring mounting screws attach the blade ring
assembly to the motor, inserting the screws one by
one using the provided screwdriver and tightening
securely by hand only. Repeat for each screw.
BLADE INSTALLATION
Blade Iron Screws (11)
Screws (5)
Blade Badges (5)
Blade Irons (5)
Figure #1
A
LESSANDRIA
Blade Screws (21)
Blades (5)
BLADEHOLDER
SCREWS
Figure #2
FAN BODY
BLADE RING
ASSEMBLY
Figure #3
RUBBER
GROMMET
BLADE RING
MOUNTING
SCREWS (5)
Figure #4
®
Phillips
Screwdriver
BLADEHOLDER AND
BLADE
BLADE RING
11