Star Micronics NP-266S Product Specifications page 46

58) Definition of additional characters
* Effecive only when the Japanese font is selected
Code
Definition of additional Kanji characters
・Definition of up to 94 characters available.
・Dn is the data to be defined. Data will be 3 byte(vertical) x 24 dot(horizontal) =72 byte.
・The default status is "space"
・Once defined by command, it will be effective until execution of [Soft reset], power off
or reset signal is input.
・Only specified area will be redefined.
＜Example＞
D-F0399 NP-266S/366S Specifications Ver.0.01 Provisional
: [1C] h + [32] h + a1 + a2 + Dn
JIS Code
Shift JIS Code
P1 P4 P7
24dots P2 P5
P3 P6
:<< FS 2 a1 a2 Dn >>
* [a1=77] h
* [21≤a2≤7E] h
* [a1=EC] h
* [40≤a2≤7E , 80≦a2≦9E] h
24dots
P70
P71
P72
42
MSB
LSB