Star Micronics NP-266S Product Specifications page 31

16) Bold print set/reset :<< ESC E n >>
Code
Sets and resets the bold print
* "n" is only valid for LSB (b0)
* LSB (b0) is defined as following.
b0
0
1
* Valid for all characters
* Bold print and double strike results in the same on this printer.
* Print result may be deformed by Bold setting with Black and white reverse print.
* The default value of "n" is [00] h.
17) Double strike set/reset
Code
Sets and resets the double strike function
* "n" is only valid for LSB (b0)
* Control by "n" is explained as following.
b0
0 Resets double strike
1 Sets double strike
* Double strike and bold print result in the same on this printer.
* Print result may be deformed by Double strike with Black and white reverse print.
* The default value of "n" is [00] h.
18) Print and smallest pitch line feed:
Code
Prints the data in the print line buffer and feeds the paper by n/203rd of an inch.
* The height of character for a line is always sent by line feed. If the value of height is set
by "n" below the height of character, the same space with character height is sent by
line feed.
* Beginning of a line is a print start position.
19) International character select :<< ESC R n >>
Effective when select Japanese mode AND select overseas code, domestic code or code
858 with character code table select command.
Code
Selects the international characters.
* The values of "n" have following meanings
n(Hex)
00
01
02
03
04
05
06
07
08
09
0A
* Default value of "n" is [08] h.
D-F0399 NP-266S/366S Specifications Ver.0.01 Provisional
: [1B] h + [45] h + n
Values
Resets bold print
Sets the bold print
:<< ESC G n >>
: [1B] h + [47] h + n
Description
: [1B] h + [4A] h + n
: [1B] h + [52] h + n
Character sets
U.S.A.
France
Germany
England
Denmark 1
Sweden
Italy
Spain
Japan
Norway
Denmark 2
* [00≤ n ≤FF] h
* [00≤n≤FF] h
<< ESC J n >>
* [00≤n≤FF] h
* [00≤n≤0A] h
27