Table of Contents
Advertisement
14
1. The first code word is 4 bit length, and following all code words consist of 8 bit length.
2. Data bit numbers include "mode indicator" and "character number indicators".
40) Fixed bit image registration
Code
Description : Register the predetermined bit image print data.
* It is possible to register from 0 to 2 different kinds of patterns (3 patterns).
* In each pattern, up to the maximum of 11cm (15 cm for NP-266S) length of bit image
print data can be registered; up to the maximum of 11cm for 3" model and up to 7cm for 4"
model can also be registered. The bit image print data exceeding the maximum length is
neglected.
* The registered data is not erased when the power is set on or off or the printer is
initialized.
* "n" has a following meanings.
n (hex)
00
01
02
FF
* When registrations started in the middle of a line, whole line is registered.
* When registration ended in the middle of a line, whole line is not registered.
* Following is a command sequence of pattern 0 registration.
GS T [00] h + (bit image data assigned by ESC *) x n lines + GS T [FF] h
41) Fixed bit image print :<< GS P n >>
Code
Description : Prints the bit image print data registered.
* Selects one of the print pattern among three registered patterns by assigning 0 to 2
value to "n".
42) Firmware download :<< GS d Dn >>
Code
Description : Download printer firmware in hexadecimal code and rewrite firmware
* Dn is firmware's hex code which complies with INTELLEX Hex format.
43) Software reset
Code
Description
* This command is stored in the receive input buffer and activated in sequence.
Above means timing is different between command receive and execution
* When the cutter is in a movement, soft reset is executed after finishing cutting.
D-F0399 NP-266S/366S Specifications Ver.0.01 Provisional
L
489
M
368
Q
310
H
210
:<< GS T n >>
: [1D] h + [54] h + n
Function
Start of pattern 0 registration
Start of pattern 1 registration
Start of pattern 2 registration
End of registration
: [1D] h + [50] h + n
: [1D] h + [64] h + Dn
according to the outcome.
:<< DC1 >>
: [11] h
: Restart the firmware as the same procedure as power on.
3908
1167
2940
877
2476
738
1676
498
* [00≤n≤02] h
36
707
486
531
365
447
307
302
207
299
225
189
127
Advertisement
Table of Contents
