Star Micronics NP-266S Product Specifications page 25

7) Overall print mode setting: << ESC ! n >>
Code
Sets print mode. "n" has following meanings
Bit
0
1
2
3
4
5
6
7
* If double height and double width are set at the same time quadruple character will be formed.
* All of the printed characters will be underlined except for the 90° rotated characters and spaces
created by horizontal tab.
* Underline width is determined by the value set in [Underline set/reset] section.
The default value is "1".
* Different sizes of character mixed such as double width and normal size can be printed.
* The default value of "n" is [00] h.
* Font B is only effective when select Japanese mode AND select overseas code, domestic code
or code 858 with character code table select command.
8) Download characters set/reset : << ESC % n >>
* Effective only when select Japanese mode
Code
Setting or resetting the characters to be downloaded.
* Only LSB (b0) is valid for "n" value. LSB (b0) has the following meanings.
b0
0 Resets download chraracter
1 Sets download chraracter
* Default value is "n" = [00] h
9) Definition of download character :<< ESC & s n m a Dn >>
* Effective only when select Japanese mode
Code
Definition of download character( such as alpha numeric).
1. "s" indicates a number of bytes in a vertical direction and "a" is a number of dots in
horizontal direction.
2. "n" indicates the start character code, and "m" means the end character code. If only 1
character should be defined, then n = m.
3. Definable characters are from [20] h to [7E] h in ASCII code (95 characters).
4. "Dn" indicates the data to be defined. It indicates the "a" dots pattern from the left.
Remaining area on the right of a character is filled with spaces.
5. Once a download character is defined, it remains valid until the download character is
redefined, printer is initialized, reset signal is input, or the power is turned off.
6. Only area specified will be reset.
D-F0399 NP-266S/366S Specifications Ver.0.01 Provisional
: [1B] h + [21] h + n
Function
Character font
Undefined
Undefined
Bold
Double height
Double width
Undefined
Underline
: [1B] h + [25] h + n
Function
: [1B] h + [26] h + s + n + m + a + Dn
* [00≤n≤FF] h
Values
0
Font A Font B
-
-
Reset
Reset
Reset
-
Reset
* [00≤n≤FF]h
* [s = 03] h
* [20≤n≤7E] h
* [20≤m≤7E] h
* font A [ 01≤a≤0C ] h
* font B [ 01≤a≤09] h
21
1
-
-
Set
Set
Set
-
Set