Star Micronics NP-266S Product Specifications page 42

47) Japanese Kanji mode setting: << FS & >>
* Selects either Japan code table or non-Japan code table.
Code
Description
* It is not effective when selected Shift JIS of Japanese Kanji.
* Default is the reset of Japanese Kanji mode.
48) Japanese Kanji underline set/reset: << FS - n >>
Code
Description
"n" has following meanings
n(hex)
00
01
02
* All of the printed characters will be underlined except for the 90° rotated characters and
spaces created by horizontal tab.
* This command is effective only when select Japanese Kanji mode.
* The default value of "n" is [00] h.
49) Japanese Kanji mode reset: << FS . >>
* Selects either Japan code table or non-Japan code table.
Code
Description
* It is not effective when selected Shift JIS of Japanese Kanji.
* Default is the reset of Japanese Kanji mode.
50) Japanese Kanji code select: << FS C n >>
* Effective only when select Japanese mode
Code
Description
* "n" has following meanings
n(hex)
00
01
* Default is the set MS-2-4 in the Dip switch
51) Japanese Kanji space setting: << FS S n1 n2 >>
Code
Description
* n1 sets the left space. Default value is [00] h.
* n2 sets the right space. Default value is [00] h.
* Width of space will be double when selected double width.
D-F0399 NP-266S/366S Specifications Ver.0.01 Provisional
: [1C] h + [26] h
: Set Japanese Kanji print mode
: [1C] h + [2D] h + n
: Set / Rest underline of Japanese Kanji
Function
Reset underline of Japanese Kanji
Set 1 dot underline of Japanese Kanji
Set 2 dots underline of Japanese Kanji
: [1C] h + [2E] h
: Reset Japanese Kanji print mode
: [1C] h + [43] h + n
: Select Japanese Kanji code
JIS code
Shift JIS code
: [1C] h + [53] h + n1 + n2
: Set side space of Japanese Kanji by dot unit
* [00≤n≤02] h
* [00≤n≤01] h
Code
* [00≤n1≤20] h
* [00≤n2≤20] h
38