Fan Preparation - Casablanca ASTRO Owner's Manual

Step 4. Remove the motor warning shield from the top of
the motor assembly. Set aside for use later during the
installation.
Step 5a. Remove the motor shipping blocks by turning the
motor to the opening slot in the motor adaptor plate as
shown.
Step 5b. Use the provided screwdriver to turn screws
counterclockwise to loosen and remove. Repeat for all
shipping blocks. Discard shipping blocks and screws as they
will not be reused.
Step 5c. Remove shipping block warning label and discard.
6

FAN PREPARATION

FAILURE TO DO SO WILL CAUSE FAN TO FALL
INSTALLER
GIVE THIS TAG TO THE
CONSUMER AFTER
INSTALLATION COMPLETE
TIGHTEN
LOCKSCREW
REQUIRE A GROUND FAULT INTERRUPTER (GFI)
DANGER
IT IS IMPERITIVE THAT THE LOCKSCREW
BE SET TIGHTLY AGAINST THE DOWNROD
THREADS AFTER FAN IS ASSEMBLED
DO NOT OIL SEALED BEARINGS!
INSTALLER
CONFIRM LOCKSCREW
IS PROPERLY TIGHTENED
P/N 1942640 SRB4/96
TIGHTEN
LOCKSCREW
CAUTION
DAMP LOCATION RATED FANS
USE A WEATHER PROOF OUTLET BOX
PROPERLY CONNECT GROUND WIRES
USE ONLY UNDER A WEATHER
PROOF STRUCTURE